Filter products


Ready to ship in approx. 5 days
Fully CNC machined lower triple clamp with aluminium steering stem for Aprilia RSV4 . Made to be used with the stock fork (53 mm) - other clamping diameter on request. The triple clamp is 40 mm thick - made from a solid block of aircraft aluminium, but very lightweight. So it brings the needed stiffness in the fork. The triple clamp is a masterpiece of high class german engineering. Great matching the unique look of your Aprilia. With it's fully compatibility of the adjustable steering stops this triple clamp increases the visual appeal of your bike. The stock steering nut can still be used. Fully CNC machined from solid Aircraft-Grade billet aluminum, our Performanceparts triple clamp is stronger than the stock Aprilia unit, but light in weight as well. Avaiable in black or silver anodised. Other colors on request. Scope of delivery: lower triple clamp, aluminium steering stem, bolt set, TÜV certificate. Details: · incl. aluminium steering stem · fully cnc machined · black or silver anodised finish · fits without any changes · Made in Germany · incl. TÜV Papers Fits all: Aprilia RSV4 2015-2019 with 53 mm fork tube diameter


Ready to ship in approx. 5 days
Fully CNC machined, complete triple clamp kit with handlebar risers for Aprilia RSV4 2009-2014 and RSV4 1100 Factory 2020- Made to be used with the original Sachs fork with 51mm or Öhlins fork with 53mm clamping diameter. The upper triple clamp is 30mm thick - made from a solid block of aircraft aluminium, but very lightweight. Height of the bar clamps is 30mm - additional spacers see accessories. The triple clamp is a masterpiece of high class german engineering. Great matching the unique look of your Aprilia. With it's fully compatibility of the steering lock mechanism this triple clamp increases the visual appeal of your bike. The stock steering nut can still be used. Fully CNC machined from solid Aircraft-Grade billet aluminum, our Performanceparts triple clamp is stronger than the stock Aprilia unit, but light in weight as well. Avaiable in black or silver anodised. Other colors on request. Scope of delivery: upper triple clamp, handlebar risers for 28.6mm bars, stainless steel bolts, TÜV certificate. Shown handlebar not included. For our sports clamp-on handlebars see accessories below. · Fits Aprilia RSV4 2009-2014 and RSV4 1100 Factory 2020- · incl. handlebar clamps for 28.6mm bars · fully cnc machined · black or silver anodised finish · fits without any chnages · Made in Germany · incl. TÜV Papers


Ready to ship in approx. 5 days
Fully CNC machined, complete triple clamp kit with handlebar risers for Aprilia RSV4 2015-2019 Made to be used with the stock fork - other clamping diameter on request. The upper triple clamp is 30mm thick - made from a solid block of aircraft aluminium, but very lightweight. Handlebar risers have a height of 30 mm. The height can be individually varied by using additional spacers (see accessories). The triple clamp is a masterpiece of high class german engineering. Great matching the unique look of your Aprilia. With it's fully compatibility of the steering lock mechanism this triple clamp increases the visual appeal of your bike. The stock steering nut can still be used. Fully CNC machined from solid Aircraft-Grade billet aluminum, our Performanceparts triple clamp is stronger than the stock Aprilia unit, but light in weight as well. Avaiable in black or silver anodised. Other colors on request. Longer brake line and clutch cable are needed. Longer throttle cables must be used.On the model 2016 onwards with drive-by-wire, the electric cables are long enough. Fairing must be changed or modified. Scope of delivery: upper triple clamp, handlebar risers for 28.6mm bars, bolt set, TÜV certificate. Shown handlebar not included. · Fits Aprilia RSV4 2015 -2019 · incl. handlebar clamps for 28.6mm bars · fully cnc machined · black or silver anodised finish · Made in Germany · incl. TÜV certificate


Available, delivery time: 1-3 days
Set of modular riser clip-ons for APRILIA RSV4 1000. Raises the handlebar position for about 35 mm. The comfort while riding longer distances is much better with less pressure on the wrists! Fits without modification of the fairing / windshiel. Also you can keep all stock cables and wires. No modifivations necessary. Selection of possible heights: RVS4 1000 up to 2014 with 20mm spacer - approx. +35 mm RVS4 1000 from 2015 with 10mm spacer - approx. +25 mm The ABS hose is the limiting factor for the 2015 onwards models, as it is relatively short from stock. It is possible to re-route the hose, but it is then no longer as visually appealing. Delivered with TÜV certificate, so you can use the handlebar set street legal. Avaiable in silver or black anodised. With standard 53mm for the Aprilia or 51mm clamping diameter for the Aprilia R / Factory with Ohlins fork.


Ready to ship in approx. 5 days
This cnc machined triple clamp is a real eyecatcher on your RSV4 With it's plain but technical perfect design it makes the even very RSV better. Pockets reducing the weight and alowing the free sight on the steering head without the reduction of mechanical strenght. The triple clamp is milled out of solid aircraft aluminium (7075) and has fixing points for the ignition lock. The delivery of all necessary parts makes the assambly simple and safe. Facts: · for Aprilia RSV4 2009 - 2014 · 51mm upper fork diameter · For use with the original steering head nut · milled on modern cnc machines · fits to the motorcycle without modification · lack or silver anodized, other colours are possible · Made in Germany


Ready to ship in approx. 5 days
This cnc machined triple clamp is a real eyecatcher on your RSV4 With it's plain but technical perfect design it makes the even very RSV better. Pockets reducing the weight and alowing the free sight on the steering head without the reduction of mechanical strenght. The triple clamp is milled out of solid aircraft aluminium (7075) and has fixing points for the ignition lock. The delivery of all necessary parts makes the assambly simple and safe. Facts: · for Aprilia RSV4 2015 onwards · 51 mm upper fork diameter · for use with the original steering head nut · milled on modern cnc machines · fits to the motorcycle without modification · lack or silver anodized, other colours are possible · Made in Germany


Available, delivery time: 1-3 days
The Performanceparts Aprilia RSV and Tuono replacement brake disc buttons / floater allows to change the oem Grimeca riveted brake discs from semi- or non-floating to full-floating brake discs. Also as replacement buttons / floater for worn stock parts. Simply mount the hard anodised brake buttons in exchange for the stock brake buttons. The brake disc buttons allow the brake disc an exact centering between the brake pads. A floating rotor will find it's own optimal path through the brake caliper. They also help control disc warping under hard braking by allowing the braking surface to expand and contract naturally. Due to this you get a much better brake performance. No reduction in braking power, no brake judder, extremely good brake control. Made of extrem tough air craft aluminium 7075 T6 with a very hard anodised surface. Comes ready to mount with circlip and washer. Price per piece. Fits all Aprilia RSV and Tuono.