Close filters
 
  •  
from to
1 From 2
No results were found for the filter!
Lenkerböcke E5 Exzentrisch, M10 Verschraubung, 22mm, silber
Handlebar Clamps off-centered 22 or 28mm
Off-centered handlebar mounting set for 22mm or 28mm handlebars like e.g. Magura, Pro Taper. The eccentric productions will allow a +/-5mm for- or backward handlebar positon compared to the stock handlebar. The fully cnc machined...
€74.95 *

Ready to ship in 1 workday(s)

Lenkerböcke E5 Classic, #varinfo
Handlebar clamps 'Classic' 22/28mm
Handlebar clamps 'Classic' for 22 or 28mm bars Fully CNC machined handlebar risers for 22mm or conical 28.6mm diameter handlebars like e.g. Rizoma, LSL or Magura. They mount the bars approximately 20mm from the base of the triple clamp...
€69.95 *

Ready to ship in 1 workday(s)

Ducati Kupplungsnehmerzylinder EVO3, #varinfo
EVO3 clutch slave cylinder DUCATI
The PERFORMANCEPARTS EVO3 Ducati clutch slave cylinders will reduce the necessary hand power for about 25%! It is designed to improve the efficiency and looks of the original clutch slave cylinder. The enhanced bigger piston reduces the...
€149.95 *

Ready to ship in 1 workday(s)

Distanzstück für 76-E5 Lenkerböcke, #varinfo
Riser OTR handlebar clamps (1 pcs)
Distance bushing in various heights for our cnc machined handlebar clamps. The fully cnc machined bushing is avaible from 10-50mm height. By using this spacer in combination with our handlebar clamps almost all heights are possible. So...
€8.95 *

Ready to ship in 1 workday(s)

Brembo Radial Bremspumpe RCS 19 x 18-20, ABE
BREMBO RCS 19x18-20 master brake cylinder
Brembo Master Radial brake pump RCS 19. Technical data: • 19 RCS / leverage translation either 19 x 20 (black) or 19 x 18 (red) • with hinged lever • Housing made of forged aluminum • CNC surface edited, hard anodized • with mechanical...
€279.95 *

Ready to ship in 1 workday(s)

Kombiwerkzeug  SW30/28 Ducati Scrambler, Monster 696, SportClassic 1000
Special tool front / rear axle nut Ducati...
€49.95 *

Ready to ship in 1 workday(s)

Ducati Spezial Steckschlüssel Lenkkopfmutter
Ducati steering stem nut tool
Special tool for adjusting steering head nut for all Ducati models with 8 hole steering head nut. To be used with standard 1/2 inch internal square drive. CNC machined from high grade 7075 T6 aircraft aluminium. Fits all slotted steering...
€39.95 *

Ready to ship in 1 workday(s)

Radumbau 999 Guss Rad in Sportclassic Sport 1000 / S uneloxiert/natur
Distance bushing set for utilization of 999 wheels
Wheel spacer kit for easy install of DUCATI 999 standard or forged rear wheel in the Ducati Sport Classic models. Front wheel from 999 will fit without any changes. Made of high grade air craft aluminium 7075 T6. Please note: You must...
€139.95 *

Ready to ship in 1 workday(s)

Floater 14x4,5mm #varinfo
Brake disc buttons / floater 14mm x 4.5mm
Brake disc buttons / floater 14mm x 4.5mm The Performanceparts 14mm x 4.5mm replacement brake disc buttons / floater allows to change riveted brake discs from semi- or non-floating to full-floating brake discs. Also as replacement...
€4.15 *

Ready to ship in 1 workday(s)

Lenkkopfmutter wie Ducati Original für Modelle mit 40mm Durchgang, rot
Steering head nut ring Ducati
Lightweight, fancy and precisely made steering head nut for different Ducati bikes with bigger steering head tube diameter. Made of high grade aircraft aluminium. 40mm diameter. Avaiable in different anodised colors. Fits e.g.: • DUCATI...
€49.95 *

Ready to ship in 21 workday(s)

Gabeleinstellsterne Öhlins 17mm, #varinfo
Fork preload adjusters OHLINS fork
Set of front fork preload adjusters for a lot of Ohlins front forks. Fits e.g. Ducati 748R - 996R - 998R, 1098, Multistrada 1100, Aprilia RSV / Mille, Ducati Monster with Ohlins fork (17mm Hexagon) CNC machines from high-grade aluminium....
€29.95 *

Ready to ship in 1 workday(s)

Kupplungsfederteller und Federn Satz, Ducati, alle mit Trockenkupplung außer 1098 / 1198 / Streetfighter 1098 / Hypermotard 1100 / Monster 1100
Ducati Dry clutch clutch springs and Caps
Set 6 x high gloss zinc coated springs and 6 x aluminium spring caps. Caps avaiable in different anodizing colors. Fits all Ducati with Dryclutch, except Ducati 1098 / 1198 / Streetfighter 1098 / Hypermotard 1100 / Monster 1100.
€35.95 *

Ready to ship in 1 workday(s)

1 From 2
Viewed