Machined from the solid, openwork triple clamp for Ducati Panigale V4. The high-quality finish and exclusive design of this Performanceparts triple clamp give your DUCATI an individual look and improves performance without increasing weight.   The open design provides a clear view of the steering head. The weight is reduced to a minimum without affecting the strength. Through our racing experience and FIM analysis, the design has been engineered for optimum torsion, so that the bike sticks perfectly to the tarmac even at the highest speeds on the racetrack. The noble design, adapted to the overall appearance of the Ducati, and the full functionality with mounts for the steering lock and steering damper make this triple clamp an eye-catcher on every V4. The original steering head nut can still be used. Alternatively, there is our aluminium steering head nut available in various anodised colours. See accessories. Elaborately manufactured from high-strength aviation aluminium (7075) 3D and anodised in black or silver. Other anodised colours available at extra cost. Fits standard Showa or Öhlins forks. The triple clamp is supplied with a TÜV parts certificate for registration according to §19.2.   Fakts:   fits Ducati Panigale V4 CNC machined from 7075 T6 aluminium 1-fach Klemmung: Höhe der Gabelbrücke im Klemmbereich 22mm Fits without any changes on the bike Available for SHOWA or ÖHLINS forks Surface black or silver anodised Made In Germany included german TUV approval   Fits all:   Ducati Panigale V4 R 2019 - 2020 - 2021 Ducati Panigale V4 S 2018 - 2019 - 2020 - 2021 Ducati Panigale V4 2018 - 2019 - 2020 - 2021  

Conspicuous and futuristic shaped fully 3D cnc machined top yoke for the Ducati 899, 959 and 1199 Panigale. The triple clamp is a masterpiece of high class german engineering. Great matching the unique look of your Ducati. With it's fully compatibility of the steering lock mechanism this triple clamp increases the visual appeal of your bike. The stock steering nut can still be used. Fully CNC machined from solid Aircraft-Grade billet aluminum, our Performanceparts triple clamp is stronger than the stock Ducati 899 or 1199 unit, but light in weight as well. Avaiable in black or silver anodised. Other colors on request. Use in one of the most spectacular Panigale build up by 4.22 Corse! Scope of delivery: upper triple clamp, stainless steel bolts, TÜV certificate. Shown steering head nut not included. Fits all Ducati: 53mm clamping: · SBK 1199 Panigale R 2013-17 · SBK 1199 Panigale S 2012-14 · SBK 1199 Panigale Superleggera 2014 · SBK 1299 Panigale S 2015-17 · SBK 899 Panigale 2013-15 · SBK 959 Panigale 2016-17 Fits all Ducati 57mm clamping: · SBK 1199 Panigale 2012-14 · SBK 1299 Panigale 2015-17 Facts: · with steering lock indent · thickness: upper clamp 23mm · off-set 30mm · Skillfully CNC machined, made of high grade 7075 aluminium · black or silver anodised · fits without any changes · Made in Germany · delivered with TÜV certificate!

Upper triple clamp for a Streetfighter / Superbike build Panigale 899, 959, 955 V2 and 1199 / 1299. Available with 1-fold clamp (height 23mm) or 2-fold clamp (height 40mm).A +/-5mm adjustable handlebar position is realized through eccentric threaded handlebar clamps.The triple clamp comes with a holder for the original dashboard. Cut-out pockets at the bottom minimizing the weight without a reduction of the strength. With it's fully compatibility of the steering lock mechanism and the steering damper the triple clamp increases the visual appeal of your bike. The stock steering nut can still be used. With it's 3D finish and the full funcionality is the the triple clamp a real eycatcher on every Panigale - Steetfighter conversion. The triple clamp is made from high grade aluminium (7075) and comes silver or black anodized. Other colours are possible on request. Shown stearing head nut in the picture is not part of the delivery scope. Facts: · 1-fold clamp: height at the clamp 23mm · 2-fold clamp: height at the clamp 40mm · Fork, dashboard and steeringhead nut can be used without change · for 28.6 mm handlebars (1.1/8") · Anodized in black or silver - other colours on request · Made in Germany · Depending on the handlebar clutch- /brake lines may have to be altered. Fairing has to be altered.   Fits  all Ducati Panigale: 53 mm clamping for: · SBK 1199 Panigale R 2013-18 · SBK 1199 Panigale S 2012-14 · SBK 1199 Panigale Superleggera 2014 · SBK 1299 Panigale S 2015-18 · SBK   899 Panigale 2013-15 · SBK   959 Panigale 2016-18 · SBK  955  Panigale V2 2020-2021 57 mm clamping for e.g.: · SBK 1199 Panigale 2012-14 · SBK 1299 Panigale 2015-18

Upper triple clamp for a Streetfighter / Superbike build of the Panigale V4 Available with 1-fold clamp (height 23mm). A +/-5mm adjustable handlebar position is realized through eccentric threaded handlebar clamps.The triple clamp comes with a holder for the original dashboard. Cut-out pockets at the bottom minimizing the weight without a reduction of the strength. With it's fully compatibility of the steering lock mechanism and the steering damper the triple clamp increases the visual appeal of your bike. The stock steering nut can still be used. With it's 3D finish and the full funcionality is the the triple clamp a real eycatcher on every Panigale - Steetfighter conversion. The triple clamp is made from high grade aluminium (7075) and comes silver or black anodized. Other colours are possible on request. Shown stearing head nut in the picture is not part of the delivery scope. Facts: · 1-fold clamp: height at the clamp 23mm · Fork, dashboard and steeringhead nut can be used without change · Anodized in black or silver - other colours on request · Made in Germany · Depending on the handlebar clutch- /brake lines may have to be altered. Fairing has to be altered.   Fits  Ducati Panigale: 53mm clamping: · SBK Panigale V4 ·  57mm clamping: · SBK Panigale V4