Special made race clip-ons for the Ducati Monster models. CNC machined, lightweigt and with a filigree optic. Clamps and handlebar tubes are avaiable in different colours available : silver, black, titan   Made of high grade aircraft billet aluminium (7075 T6), surface anodised. Other colors on request.   Complete handlebar tube lenth is 275mm. Other length (250, 260, 290mm) on request. Height of the clip-on clamps is 39 mm. Handlebar crank is 8°.   Made in Germany. 5 years warranty.   Set contains:   2 clamps 2 handlebar tubes 2 handlebar tube end caps bolt set instructions TÜV certificate

Ducati Monster 696 - 796 - 1100 upper triple clamp   Fully CNC machined top yoke with handlebar risers for Ducati Monster 696 - 796 - 1100 model range. Available for the stock SHOWA (50mm) or ÖHLINS (53mm) sport front fork sets. To be used with all standard 28.6mm (1 1/8") handlebars. The triple clamp is a masterpiece of high class german engineering. Great matching the unique look of your Ducati Monster bike conversion. With it's fully compatibility of the steering lock mechanism and the reinforced handlebar clamps with upper bracket this triple clamp  increases the visual appeal of your bike. The excentric handlebar clamps allow a 5mm for-or backward orienteted mounting position. The stock steering nut can still be used. For our anodised aluminium steering nut see accessories below. Fully CNC machined from solid Aircraft-Grade billet aluminum, our Performanceparts triple clamp is stronger than the stock Ducati unit, but light in weight as well. Avaiable in black or silver anodised. Other colors on request. Scope of delivery: upper triple clamp, excentric handlebar clamps, handlebar clamp cross bracket, stainless steel bolts, TÜV certificate. Facts: · fits Ducati Monster  696 - 796 - 1100 · with steering lock indent · thickness of top yoke: 20mm · mounting points for headlight / speedo · Skillfully CNC machined, made of high grade 7075 aluminium · black or silver anodised · for 28.6mm (1 1/8") handlebars · handlebar position can be changed with additional spacers · for Ohlins or Showa front fork set · Made in Germany · delivered with TÜV certificate!  

Fully CNC machined lower triple clamp  for Ducati Monster models like 696 - 795 - 796 - 1100 Avaiable with 60mm and 3-fold clamping or in a 80mm version with 4-fold clamping (on request). Comes ready to mount with CNC machined steering stem. Fork tube clamping diameter avaiable with 54 or 56 mm. This triple clamp is a masterpiece of high class german engineering. Great matching the unique look of your Ducati. With it's fully compatibility of the steering stops this triple clamp increases the visual appeal of your bike. The stock steering nut can still be used. For our anodised aluminium steering nut see accessories below. Fully CNC machined from solid Aircraft-Grade billet aluminum, our Performanceparts lower triple tree is stronger than the stock Ducati unit, but light in weight as well. Avaiable in black or silver anodised. Other colors on request. Scope of delivery: lower triple clamp, steering head tube, steering stops, headlight mounting brackets, bolt set, TÜV certificate. The facts: · fits for: Ducati Monster 696 - 795 - 796 - 1100 · Stock fork tube diameter 54mm or 56mm · made of high grade aircraft aluminium · CNC machined · avaible in black or silver anodised - other colors on request · fits without any changes on the bike · Made in Germany · incl. TUV certificate Fits all: · Monster 696 · Monster 795 · Monster 796 · Monster 1100

Set of sport handlebars clip-on's with variable heights and various cranks. The handlebar was developed to be mounted on top or under the top triple clamp. So this set of riser bars will give you a much more comfortable seat position, the stress on your wrist will be much lower. Available in 0° or 4° degrees crank and with a hight up to 40mm. Additional spacers can be ordered below (see accessories). Handlebar tubes are manufactured in 260, 275, 290 and 350mm length. Fully CNC machined from solid Aircraft-Grade billet aluminum, our Performanceparts sport clip-ons are stronger than the most stock bars, but light in weight as well. Avaiable in black or silver anodised. Other colors on request. Clamp diameter 41, 52 mm and 54 mm are realized by an additional reduction bushing. Scope of delivery: Clamps, handlebar tubes, risers (if ordered), bolts, TÜV certificate. Fits e.g.: APRILIA : RSV Mille R , RSV Mille Factory Typ RR DUCATI : 600 - 1000 Monster, 600 - 900 SS, 750 - 1000 SS IE, 748 / 916 / 996 / 998, 749 / 999, 848, 1098, HONDA : PC25, PC31, PC35, SC 35 KAWASAKI : ZX-6R SUZUKI : GSX-R600WVBG, GSX-R 750 WVBD, GSX-R 1000 WVBL, GSX-R 1100 GU75C, GSX 1400 WVBN YAMAHA : TRX 850 4UN, YZF 600F 4TV/4WD, YZF 750R 4HN, YZF 750SP 4HT, YZF 1000R 4VD/4SV , R1 RN01/RN04/RN09/RN12/RN19 Facts: · Skillfully CNC machined, made of high grade 7075 aluminium · Set of risers included · black or silver anodised · fits without any changes · avaiable with different clampings sizes · Made in Germany · delivered with TÜV certificate!

Fully CNC machined, upper triple clamp including Cafe Racer clip-ons for Ducati Monster 696/796/1100 and 1000s. Avaiable for the stock Showa or Öhlins forks (50mm) or aftermarket Öhlins with 53mm.. This triple clamp - clip-ons set is a masterpiece of high class german engineering. Great matching the unique look of your Ducati. With it's fully compatibility of the steering lock mechanism this triple clamp increases the visual appeal of your bike. The stock steering nut can still be used. For our anodised aluminium steering nut see accessories below. Fully CNC machined from solid Aircraft-Grade billet aluminum, our Performanceparts triple clamp is stronger than the stock Ducati unit, but light in weight as well. Avaiable in black or silver anodised. Other colors on request. Handlebar height approx. 20 mm above handlebar clamp. A further increase of 10 or 20 mm is possible. See accessories. For an additional 10 mm increase, 2 extra bolts M8x55 are required, for additional 20 mm rise 2 extra bolts M8x65 needed. Scope of delivery: upper triple clamp, sport clip-ons handlebar set, bolt set, TÜV certificate. Facts: · fits Ducati Monster 696 - 796 - 1100 - 1100S- 1100 EVO · without attachment for steering damper · with steering lock indent · Skillfully CNC machined, made of high grade 7075 aluminium · black or silver anodised · fits without any changes · for stock 50mm Showa / Marzocchi / Ohlins or aftermarket 53mm Ohlins · incl. aluminium sport clip-on set · Made in Germany · delivered with TÜV certificate!

Fully CNC machined, upper triple clamp (top yoke) for use with sport clip-ons for the Ducati Monster 696, 796 and 1100 model range. Avaiable with stock (50mm) or different clamping diameter for use with sport front fork sets e.g. 53mm from Ducati 1098S. The triple clamp is a masterpiece of high class german engineering. Great matching the unique look of your Ducati. With it's fully compatibility of the steering lock mechanism this triple clamp increases the visual appeal of your bike. The stock steering nut can still be used. For our anodised aluminium steering nut see accessories tab. Fully CNC machined from solid Aircraft-Grade billet aluminum, our Performanceparts triple clamp is stronger than the stock Ducati unit, but light in weight as well. Avaiable in black or silver anodised. Other colors on request. Please Note: No mounting points / threats for OEM headlight and speedo! To be used ambitious modifications with aftermarket headlight and speedo. If you need the mounting points, please ask. Scope of delivery: upper triple clamp, Cockpit brackets, bolt set,, TÜV certificate. Facts: · Complete CNC machined · To be used with Clip-ons (not included - See accessories) · avaiable for 50mm or 53mm fork tube diameter · with steering lock indent · skillfully CNC machined, made of high grade 7075 aluminium · black or silver anodised · fits without any changes · Made in Germany · delivered with TÜV certificate!   Fits all Ducati Monster: · Monster 696 · Monster 796 · Monster 1100 · Monster 1100S    

Fully CNC machined upper triple clamp Ducati Monster for use with our Cafe Racer clip-ons. Fits the Ducati Monster 696 - 796 - 1100 models. Avaiable for the stock Showa or Öhlins forks (50mm) or aftermarket Öhlins with 53mm.. This triple clamp is a masterpiece of high class german engineering. Great matching the unique look of your Ducati. With it's fully compatibility of the steering lock mechanism this triple clamp increases the visual appeal of your bike. The stock steering nut can still be used. For our anodised aluminium steering nut see accessories below. Fully CNC machined from solid Aircraft-Grade billet aluminum, our Performanceparts triple clamp is stronger than the stock Ducati unit, but light in weight as well. Avaiable in black or silver anodised. Other colors on request. Needed sport-clip-ons not included. Scope of delivery: upper triple clamp, screws, TÜV certificate. Facts: · fits Ducati Monster 696 - 796 - 1100 - 1100 - EVO · needed clip-ons not included · OEM handlebar can not be used · with steering lock indent · Skillfully CNC machined, made of high grade 7075 aluminium · black or silver anodised · for stock 50mm Showa / Marzocchi / Ohlins or aftermarket 53mm Ohlins · Made in Germany · delivered with TÜV certificate!